What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 06:05
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What is lightning?
Michaels buys Joann brand, plans to expand crafting supply to meet demand - ABC News
2024–10–16 [ OO OLAOYE OYEBODE ]
but I think this circuit , shows a few more pieces.
This is 'the assistant's answer'
What is the estimated number of people with an extra X chromosome?
One is “what exactly is in a ‘surge protector’ ? ”
The bolt then partially travels down the line to your home.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Can people who have never met you tell if you are a covert narcissist?
An AC voltage/ current source, and an ac inductive load.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
It also is a device that limits the change in current flow.
"Can't Believe Virat Kohli Knew...": RCB's Celebrations Amid Stampede Row Heats Up - NDTV Sports
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
so, what happens?
So, the voltage could go up to 500 volts, and the fuse will not open up.
But it can get overloaded, and no longer works.
Because the load is inductive, the current lags the voltage.(by a bit).
Logan Gilbert sees velocity dip in rehab start | Mariners injury updates - The Seattle Times
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
First Sentence:
It seems Mohan does not understand the difference between a comment and an Answer.
Why are Korean female leads so angry all the time?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then describes the function of a fuse.
These devices are installed between the “hot” and “neutral” and protective ground.
What's the most valuable lesson you've learned in life, and how has it impacted your journey so far?
But… the neutral is now “floating” because of the 1 ohm resistance.
(Dc diagram shown, AC is similar).
This is where the MOV conducts again, and dissipated the energy.
Google says its updated Gemini 2.5 Pro AI model is better at coding - TechCrunch
Upvotes:
One
This one hit behind the barn.
How Can AI Researchers Save Energy? By Going Backward. - Quanta Magazine
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
nine
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
but this device (an Inductor) … impedes the rapid changes in the current.
The other is “what does a “fuse” do?”
The MOV will conduct when the voltage exceeds 50% of line voltage.
A fuse is a non-resetable over current circuit protector.
These are simplified answers to the original question, and does not change anything I wrote above.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
[image of Common-mode choke]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then asserts :
For this case there are devices called Metal oxide varistors (MOV).
What does a fuse do?
Edit 2024–10.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
A circuit breaker is similar, but is resettable.
In schematic diagrams this is the symbol for a fuse:
I post the exact comment here.
The third is lightning and “how it gets conducted into a home.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
He then describes Rainy Season and Lightning.
2024–10–14 [Omar Gharbi Omar Gharbi ]
At least they know the answer if they wanted it.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This device then solves the entire problem.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Now when you have a certain ac resistance, then a current flows in a loop.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
There are two important concepts here.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–10[John johnson John Johnson ]
Barnstars:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Here is a simplified AC power diagram.
At one ohm, the resistor has a maximum of 1 watt power.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
the problem then depends on "how fast does the fuse operate?".
a photo is worth a thousand words.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
There are three different concepts here that are getting confused.
eight
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where this question deviates from being a 'generic' question, and becomes more specific.
what exactly is a ‘surge’ protector?